Stursan ST-HC JZ1
Description
ST-HC JZ1 series is a emulsifying homogenizing pump that could be operated for continuous production, and is composed of stator and rotor. The processed media will be operated through 6-10 layers stators and rotors, and then be dispersed, cut, refined, smashed, emulsified, mixed etc. step by step.
Maintenance disassembly and installation can be completed without professional staff and special tools.
The initial use of installation debugging will not be damaged, even if a short reverse rotation. The impeller and shaft are connected by keyway impeller and mechanical seal rotating ring are connected by pin; mechanical seal static ring and pump body are connected by special-shaped flange.
This ST-HC JZ1 pump is compatible with single and double machine seal, you only need to change the machine seal.
Maintenance disassembly and installation can be completed without professional staff and special tools.
The initial use of installation debugging will not be damaged, even if a short reverse rotation. The impeller and shaft are connected by keyway impeller and mechanical seal rotating ring are connected by pin; mechanical seal static ring and pump body are connected by special-shaped flange.
This ST-HC JZ1 pump is compatible with single and double machine seal, you only need to change the machine seal.
Technical characteristics
- Max. flow rate: 40m3/h
- Max. power: 45KW
- Max. temperature: -20ºC to 140ºC
- Media refinement: ≤ 60 GRIT ( ≠ 300 μ m)
- Material: 304 /316L, 1.431/1.4404, ASME BPE 316L,1.4435 NB2 Fe ≤ 0.5%
- Surface treatment: ≤ Ra0.8 μ m, ≤ Ra0.6 μ m, ≤ Ra0.4 μ m
- Mechanical seal: Single and double mechanical seals
- Mechanical seal combination: See configuration table
- Inlet/Outlet connection: Thread, clamp, flange, Aseptic flange
- Certification: CE EC 1935/2004